Investor Presentaiton
r.ramson
associates
architects & engineers
3. Planning Parameters of Industries:
The road width, FSI, Setbacks etc. for cottage industries, Green industries, Orange industries and Red industries shall be regulated according to the table below. The Detailed lists of these
industries are given in Annexures V, VI, VII and VIII respectively.
Sl.No.
Description
Cottage Industries
Category of industries
Green & Orange industries
Red industries (Special & Hazardous)
A.
Minimum road width
7m
7m
7m
B.
Maximum Height
C.
Maximum FSI
18.30m
1.50
18.30m
18.30m
1.50
1.50
the property boundary.
D.
Minimum Setback
(i)
Front Setback
Where Street Alignment/new road is prescribed, it shall be from that street alignment/new road line. In the case of others, it shall be from
Abutting road width
less than 9m
9m to 18m
18m to 30.50m
More than 30.5m
Front Setback
1.5m
3.0m
4.5m
6.0m
6.0m
6.0m
(ii)
Side Setback
(iii)
Rear Setback
E.
பட்
1.50m
Nil
3.0m
2.0m
6.0m
6.0m
Structures permissible in the minimum prescribed Front set back, Side setback and Rear set back are given in the rule 28
In addition, incidental structures such as Gate pillars, servant room, watch man booth, cycle stand and toilets with height not exceeding 4m are permissible in these
minimum prescribed setback spaces.
Parking spaces shall be provided within the site conforming to standards prescribed in the Annexure - IV.
G. Rainwater harvesting provisions as prescribed in the Annexure - XXII.
www.ramsonassociates.com
5 Tube-50-850-25View entire presentation