Investor Presentaiton slide image

Investor Presentaiton

r.ramson associates architects & engineers (2) Road width: The site shall either abut on a road not less than 18 meters in width or gain access from public road not less than 18 meters in width through a part of the site which can be treated as an exclusive passage of not less than 18 metres in width. Provided further that High Rise building may be permitted with limitations on maximum FSI of the building on a site abutting or gaining access from a public road of min. 12 m or 15 m in width, or gain access from public road not less than 12 m or 15 m in width through an exclusive passage of not less than 12 m or 15 m in width, subject to compliance of the planning parameters according to the table below (3) The extent of the site, FSI, Set back etc. for High Rise Buildings shall be regulated according to the table below: Sl. No Description A Min. Road width B Maximum FSI C Maximum Coverage 12m 2.0 All Areas 15m 2.5 50% 18m 3.25 Height of the building above ground level Upto 30m D Minimum set back all around Above 30m Height of the building above ground level Upto 30m E Spacing between blocks in case of more than one block of High Rise building Above 30m Minimum required setback space from the property boundary 7m For every increase in height of 6m or part there of above 30m minimum extent of setback space to be left additionally shall be one meter subject to the maximum setback of 20m Minimum required spacing between blocks 7m For every increase in height of 6m. Or par there of above 30m. space to be left additionally shall be one meter subject to the maximum setback of 20m Note:- Road width means the road space as defined in clause (103) of rule 2. The qualifying road width for permitting High Rise buildings with more than 18.30m shall be available at least for a prescribed length of 500m in the case of Chennai Metropolitan Area and other Municipal Corporations and 250m for the other areas along the length of the road abutting the site and the stretch from a junction can be straight or a curve or zigzag or combination of the above. www.ramsonassociates.com 5 Tube-50-850-25
View entire presentation